Pre-Mixed Bags Needed:
Need more concrete shapes? Columns, walls, and footings.
Use our full Concrete Calculator →Need a gravel base for your patio?
Calculate Gravel Needed →Patio Concrete Tools & Supplies
As an Amazon Associate, we earn from qualifying purchases.
How to Plan a Concrete Patio
A well-planned concrete patio adds outdoor living space and boosts your home's value. Here's what you need to know before pouring.
Typical Patio Sizes
- 10 x 10 ft (100 sq ft): Cozy seating area for 2–4 people
- 12 x 12 ft (144 sq ft): Dining set with room to move
- 12 x 16 ft (192 sq ft): Dining plus a grill station
- 16 x 20 ft (320 sq ft): Full outdoor living area with multiple zones
Choosing the Right Thickness
Standard patio thickness is 4 inches, which is sufficient for foot traffic, patio furniture, and grills. Use 6 inches if your patio will support a hot tub, heavy planters, or very heavy furniture. Thicker slabs are also recommended for areas with poor soil or freeze-thaw cycles.
Site Preparation
- Excavate 6–8 inches below the desired finished surface level
- Add a 4-inch gravel base (crushed stone or road base) for drainage
- Compact the gravel using a plate compactor or hand tamper
- Build forms using 2x4 lumber staked around the perimeter
- Ensure a slight slope (1/8 inch per foot) away from your house for drainage
Patio Concrete Cost Guide
Concrete patio costs depend on whether you DIY or hire a professional, your region, and the patio size.
Cost Breakdown
- Materials only (DIY): $3–$6 per square foot — includes concrete, gravel base, forms, and basic tools
- Professional installation: $8–$15 per square foot — includes labor, site prep, forming, pouring, and finishing
Cost Estimates for Common Patio Sizes
| Patio Size | DIY Cost | Professional Cost |
|---|---|---|
| 10 x 10 ft (100 sq ft) | $300–$600 | $800–$1,500 |
| 12 x 12 ft (144 sq ft) | $500–$900 | $1,200–$2,400 |
| 16 x 20 ft (320 sq ft) | $960–$1,920 | $2,560–$4,800 |
Stamped or colored concrete adds $2–$5 per square foot to the total cost. Exposed aggregate finishes typically add $3–$6 per square foot.
Frequently Asked Questions
How thick should a concrete patio be?
A standard concrete patio should be 4 inches thick. This is sufficient for normal foot traffic, outdoor furniture, and grills. If your patio will support a hot tub, heavy stone planters, or other significant loads, increase the thickness to 6 inches and consider adding rebar reinforcement.
How long before I can walk on new patio concrete?
You can walk on new concrete with light foot traffic after 24–48 hours. However, avoid placing furniture or heavy items on the surface for at least 7 days. Full curing takes 28 days — during this time, keep the surface moist and avoid heavy loads or vehicle traffic near the slab.
Do I need rebar in a patio?
Fiber mesh is sufficient for most standard 4-inch residential patios. It helps prevent surface cracking and is mixed directly into the concrete. Use rebar (typically #3 or #4 bars on a 24-inch grid) for slabs that are 6 inches or thicker, patios built on poor or expansive soil, or any slab that will support heavy loads like a hot tub.
How much does a 12x12 patio cost?
A 12x12 concrete patio (144 sq ft) costs approximately $500–$900 for DIY (materials only) or $1,200–$2,400 for professional installation. This assumes a standard 4-inch slab with a broom finish. Decorative finishes like stamping or staining will increase the cost.