Length, area and volume arithmetic for every project. Start here when a measurement needs adding up, converting or checking before you buy anything.

Square Footage Calculator

Calculate area for rooms, flooring, paint coverage, and more. Works for rectangles, triangles, and complex shapes.

Open calculator →

Cubic Yard Calculator

Convert dimensions, square feet, cubic feet, cubic meters or tons to cubic yards. Shows how much a yard covers at your depth and what it weighs by material.

Open calculator →

Feet and Inches Calculator

Add, subtract, multiply and divide feet and inches with fractions down to 1/64 in. Converts to decimal feet, inches, millimeters and meters, with rounding.

Open calculator →

3-4-5 Rule Calculator: Square a Corner and Check Diagonals

Square a corner with the 3-4-5 rule, find the diagonal for any rectangle, check an existing corner’s angle, and see how far to rack an out-of-square frame.

Open calculator →

Linear Feet Calculator

Add up a cut list in linear feet, convert square feet to linear feet of boards with gap and waste, and convert board feet to linear feet for any lumber size.

Open calculator →

How These Estimates Work

Most material estimates start with a measurement that needs work first: two wall runs added in feet and inches, a decimal from a laser measure turned into a tape mark, a room in square feet, or a bed in cubic yards. The feet and inches calculator handles the length arithmetic and the fractions, the 3-4-5 rule calculator checks that a corner is 90 degrees before anything is built on it, the linear feet calculator totals boards and trim, the square footage calculator turns lengths into area, and the cubic yard calculator turns area and depth into volume. Each family of material calculators takes it from there.

Other Calculator Categories

Last updated · How we calculate